OmniPrint OM220, Руководство пользователя

Страница: 6 / 14

6
3. Paper Loading
Use a paper roll that meets the specifications below. Do not use paper rolls that
are glued to the core. Make sure data is not being transmitted to the printer while
loading paper.
1. To open the printer cover lift the latch up from the front as indicated in illustration “a”.
2. Open the cover fully and remove the old paper roll core.
3. Please make sure no objects are dropped inside and avoid touching any internal parts of the
printer including the paper cutter and print head with any sharp object.
4. Make sure the paper roll is positioned as shown in Illustration “b”. At least 4 inches of paper
should extend beyond the tear bar.
5. Slowly close the paper cover until it locks in place. “c”
6. Press the FEED button to make sure the roll is properly loaded, and paper exits correctly
from the printer; illustration “d”.
7. Tear the excess paper against the serrated edge; illustration “f”.
8. To reorder paper, please use part number: PP-300-165.
“a”
“b”
Pull up on latch
Insert new paper roll as shown