12. Operation
33 www.sinetech.co.za
12-3. Button Definition
Button
Operation
Function
ENTER/ON
Short press.
Enter query menu.
If it’s in query menu, press this button to
confirm selection or entry.
Press and hold the button for
approximately 1 second when
the utility is detected or 3
seconds without the utility.
This inverter is able to provide power to
connected loads via AC output connector.
ESC/OFF
Short press.
Return to previous menu.
Press and hold the button
until the buzzer continuously
sounds.
Turn off power to the loads.
Up
Short press.
Select last selection or increase value.
Down
Short press.
If it’s in query menu, press this button to
jump to next selection or decrease value.
Mute alarm in standby mode or battery
mode.
NOTE:
If backlight shuts off, you may activate it by pressing any button. When an error
occurs, the buzzer will sound continuously. You may press any button to mute it.
12-4 Query Menu Operation
The display shows current contents that have been set. The displayed contents can be
changed in query menu via button operation. Press ‘Enter’ button to enter query menu. There
are seven query selections:
Input voltage or frequency of AC input
Frequency, voltage, power or load percentage of AC output
Input voltage or power of PV input.
Battery voltage or capacity percentage.
Date and time.
Today or total energy generated.
Mode of query energy generated.
