PN: 888-61-051-W-01 revD
14
Wood Stud Installation
Using the wall plate keyholes, hang he lift assembly on the wall
screws.
Install and tighten bottom two wall screws and securely
tighten top screws. Be sure that the lift engine is level before
tightening.
DO NOT OVER TIGHTEN.
CAUTION: When mounting to wood frame wall, one set of
mounting holes must be located in the center of a wood stud
no smaller than 2x4 inches (nominal). If in doubt, consult a
local construction expert. Failure to heed this caution may
result in equipment damage and personal injury
e
f
