Document No.: IM-1508
Revision Level: 03
Approval Date: 10-JUNE-2020
Author: T. Robinson/C Fisher
Approved By: C. Fisher
2
Hero
™
40 Amp Tap Commander
Installation Guide
•
Mount the Tap Commander inside the Rectifier (It can rest free on the bottom
screen, be
mounted on the door or back of the rectifier, mounting materials not included)
•
If necessary, route the interface cable through the conduit from the Hero to the rectifier. If
the 4 pin connector must be removed in order to route through the conduit, insert stripped
wires according to the diagram below, otherwise plug in the 4 pin connector as shown.
•
Connect the Tap Power Cable to the two Power Taps previously identified and to the
provided Power Connection on the Tap Commander.
40 Amp Tap Commander
POWER CONNECTION
CONTROL CONNECTION
ALTERNATE CONTROL
CONNECTION
BUTTONS
