Omni8/16C/Omni8P User Manual
UMC1480R24.pdf
22
© Omniflex 2021
3.4.4
Mounting Bar Kits
A range of Mounting Bar Kits is available for constructing vertical stacks of 2, 3 or 4 units in height.
Each kit consists of 2 mounting bars of the appropriate size, complete with all the necessary screws
and washers to form a single column of Omni8/16C’s. These kits may be ordered using the following
Order Code numbers:
Table 3-1 – Mounting Bar Kit Ordering Information
3.5
Mounting a single Omni8/16C in a panel cut-out
The panel cut-out required to mount a single Omni8/16C is given in the following table:
Table 3-2 – Single Unit Mounting Cut-out Dimensions
Height
Width
Omni16C
112mm(4.41”)
280mm(11.02”)
Omni8C
112mm(4.41”)
136mm(5.35”)
3.6
Intrinsically-Safe Annunciator Mechanical Mounting
3.6.1
Installation Requirements
The Omni16C EX should be installed within the enclosure supplied, which provides impact and ingress
protection for windows and terminals.
All external connections must comply with the requirements of IEC60079-0 and IEC60079-11.
Cable entries though the cable glands provided in the enclosure must comply with the requirements of
IEC60079-0.
If one of the cable glands is unused, the blanking plate should be left in place.
Column Size
Order Code
2 High Mounting Bar Kit
C1431-01
3 High Mounting Bar Kit
C1431-02
4 High Mounting Bar Kit
C1431-03
