Depending on the mode selected, data is collected from pre-specified modules and
external devices.
“Adaptive data collection during turns”, enable or disable collecting data when the
vehicle makes a turn; enabling it helps increase the accuracy of recording and
displaying turns on the map. This is done by collecting additional data from the GPS
module more frequently than the “Collection Timer” parameter suggests.
“Collecting data on distance travelled” allows increasing the accuracy of tracking the
vehicle location and therefore displaying it on the map. This is done by collecting
additional data from the GPS module on the distance travelled between registered
events with set coordinates.
“Distance Travelled”, enter the value of the distance travelled from the last registered
event with set coordinates that must be reached to initiate data collection. The values
range from 10 to 1,000.
Communication Server Connection
In the section “Connection establishing parameters”:
“Period of sending data to the CS”, enter the number of minutes, upon expiry of
which, the Terminal shall connect to the communication server when within the home
network of your mobile network provider. The recommended value is 10 minutes.
Now refer to the “Roaming parameters”:
13
Communication Server Connection
Содержание Smart 3.0
Страница 1: ...Smart 3 0 Terminal User manual 11 02 2020...
Страница 27: ...Standardised voltage output Sensors with frequency output 27 Universal Inputs...
Страница 31: ...31 CAN bus...
Страница 39: ...info omnicomm world com www omnicomm world com...