3. Turn on the Encoder by clicking the On/Off button in the µMPX Encoder Settings section.
4. Set the bit rate you would like to transmit at (default is 320 kbps)
5. While feeding program audio from your processor, use the Main Input Level slider control to
adjust appropriate input levels. Adjust levels as close as you can to achieve 100% Level, without
setting off the Clip Indicator. Note that while you want to avoid clipping, being too conservative
will result in weak modulation.
6. Scroll down to the Streams section
7. Turn on the first stream
8. Type the IP Address of the target decoder into the IP field, press Enter to save.
9. Set the port number for the target decoder, press Enter to save.
10. Connect to the target decoder if it is online and verify it is receiving the stream.
QUICK-START INSTALLATION GUIDE