Assigning a Static IP Address
1. Connect a network cable to the interface labeled NET 1
2. Power on the MPX Node
3. Press the top button on the Front Panel until the NET 1 page appears.
4. Press and hold the bottom button for 10 seconds until you see the Setup page.
5. Use the top button to change values, and the lower button to advance to the next field.
6. To save changes, advance to the SAVE field and press the top button.
7. The MPX Node will now reboot, and will be set to the new IP Address.
Connecting to the user interface
Once your MPX Node has a valid IP address, the remainder of the configuration will be performed via the
web interface.
1. Open a web browser on a computer connected to the same network as the MPX Node.
2. Type the IP Address of the MPX Node into the address bar of the web browser, and press enter.
3. When the Login page is presented the first time, the username and password are both “user”
with no quotes.
QUICK-START INSTALLATION GUIDE