78
Once Java is installed on your computer, using a Web browser, connect to the IP address of your Omnia.11 as
follows: (see Network Parameter
Setup on Page 15
if you need to enter the network parameters into the Omnia.11)
1.
Open a standard Web Browser on your computer and connect to the Omnia.11 by entering:
http://xxx.xxx.x.xxx/ in the browser’s address bar where the x’s in the example above are replaced with the
Omnia.11’s IP address. Once connected you should see the Login screen:
2.
Enter th
e Password (the default is “
omnia
” –
all lower case) and click on the “
Login
” button. (Or simply
press “Enter”)
The
following
Main Menu s
creen should appear:
There are 6
buttons across the top menu bar and
5 of
those are duplicated below in the Main Menu.
The top menu bar will remain visible when in the
Data Mgmt, Configuration
and
About
screens.
You can select
Meters & Remote Control (Remote)
to open the processing screen Java applet,
User Data
Management (Data Mgmt)
to save & load processing and I/O configuration presets to & from your computer,
Configuration
to change the current password, perform software updates , switch software banks, activate new
features
and run diagnostics,
About
to
view system and support information and
Logout
to logout and return to the
login screen.
The
Main Menu
button in the top menu bar is used to get back to this screen
from the others, if needed.
