Omnia 11 Скачать руководство пользователя

Страница: 57 / 102

Nigel Tufnel

This is the “over-the-top” pr

eset. Nigel Tufnel of Spinal Tap would be proud, but since this is the Omia.11, this one

goes to 12!

Nova

This one doesn’t have any one particular outstanding direction in sound, but draws from many of the presets

qualities so is a “middle

-ground” preset

with a nice, well

-behaved sound.

O11 CHR

Another preset tuned for the CHR format and its variants. This one has more multi

band AGC activity than

HitCityRadio.

O11_CHR_V2

Same as above but optimized for the latest software features.

O6 CHR

Approximates the sound of the “CHR” preset in the Omnia

-6.

Open_Punchy

Good, general starting preset with good punch and dynamic feel.

PowerHits

A HotAC/CHR

tuned preset that sits between HitCityRadio and PowerMix.

PowerMix

PowerMix is tuned for HotAC formats and their varants. As aggressive, but less bright than the CHR

-tuned presets.

PowerMix_V2

Same as above but optimized for the latest software features.

Proof

Factory Test Preset

Don’t select this unless you are running tests on your signal or on the bench!

This bypasses

most of the processing so there is no modulation control at all!

RockNRoll

It is an updated version of the RockNRoll preset from the long line of previous Omnias. It has a moderate smile

curve and is a great starting point for Rock formats.

Rock_Warm

A warmer version of the above.

RockNRoll_V2

The default preset. Same as

RockNRoll above but optimized for the latest software features.

A great place to start!

OLID

Another preset recovered from the original Omnia.11 beta software. Good, punchy deep bass!

SOLID BRITE

The “SOLID” presets have a classic compressor sound. This one is tipped

up in brightness. Gives you that “wall of

sound”.

SOLID WARM

As above but more bass and mids for a more natural frequency balance.

Talk Medium

Nice starting point for FM talk programming.

Содержание 11







































































































Результаты поиска

Содержание 11

Отзывы:

Похожие инструкции для 11

Бренды по названию

Популярные бренды

Omnia 11, Инструкция по установке и эксплуатации

Результаты поиска

Содержание 11

Отзывы:

Похожие инструкции для 11

Бренды по названию

Популярные бренды