Omni International Bead Ruptor 4, Руководство пользователя

Страница: 3 / 16

Data herein has been verified and validated. It is believed adequate for the intended use of the
instrument. If the instrument or procedures are used for purposes over and above the capabilities
specified herein, confirmation of the validity and suitability should be obtained; otherwise OMNI
International, a PerkinElmer company does not guarantee results and assumes no obligation or
liability. This publication is not a license to operate under, or a recommendation to infringe upon,
any process patents.
This product is warranted to be free from defects in material and workmanship for a period of ONE
YEAR from the date of delivery. OMNI International will repair or replace and return free of charge
any part which is returned to its factory within said period, transportation prepaid by user, and
which is found upon inspection to have been defective in materials or workmanship. This warranty
does not include normal wear from use; it does not apply to any instrument or parts which have
been altered by anyone other than an employee of OMNI International nor to any instrument which
has been damaged through accident, negligence, failure to follow operating instructions, the use
of electric currents or circuits other than those specified on the plate affixed to the instrument,
misuse, or abuse. OMNI International, a PerkinElmer company reserves the right to change, alter,
modify, or improve any of its instruments without any obligation whatever to make corresponding
changes to any instrument previously sold or shipped.
THE FORGOING OBLIGATION IS IN LIEU OF ALL OBLIGATIONS AND LIABILITIES INCLUDING
NEGLIGENCE AND ALL WARRANTIES OF MERCHANTABILITY OR OTHERWISE, EXPRESSED OR
IMPLIED IN FACT OR BY LAW, AND STATE OUR ENTIRE AND EXCLUSIVE LIABILITY AND BUYERS
EXCLUSIVE REMEDY FOR ANY CLAIM OF DAMAGES IN CONNECTION WITH THE SALE OR FURNISHING
OF GOODS OR PARTS, THEIR DESIGN, SUITABILITY FOR USE, INSTALLATION, OR OPERATION. OMNI
INTERNATIONAL WILL IN NO EVENT BE LIABLE FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES
WHATSOEVER, AND THEIR LIABILITY UNDER NO CIRCUMSTANCES WILL EXCEED THE CONTRACT
PRICE FOR THE GOODS FOR WHICH LIABILITY IS CLAIMED.
This product has been engineered for safety; however, basic safety precautions and common sense
must always be demonstrated when using any electrical product.
- DO NOT attempt to modify any part of this product.
- DO NOT allow the machine to be submerged in any liquid.
- DO NOT use in any setting other than an indoor laboratory.
- DO NOT plug power cord into an incorrect outlet or subject it to an incorrect voltage.
- Use this product only for its intended purpose.
- DO NOT use attachments not recommended by the manufacturer.
- DO NOT operate the product if it is damaged in any way.
- Keep this product away from heated surfaces.
- DO NOT modify the plug or cord that is provided. If the plug will not fit the outlet, have the
proper outlet installed by a qualified electrician.
- DO NOT operate the product with the safety ground disconnected.
WARNING: Reduce the risk of unintentional starting; make sure the speed switch is in the OFF
position before plugging in the motor.
WARNING: Damaged or worn power cords should be repaired or replaced immediately by a
qualified electrician.
WARNING: Improper connection of the equipment can result in a risk of electric shock.
WARNING: Only use cords supplied by OMNI International or those approved by OMNI International.
For research use only. Not for use in diagnostic procedures.