OMNITEXT-240 User Manual
P a g e
|
10
7.1
M
ONITORING PAGE
Monitoring page displays the current state of OMNITEXT-240
.
The Monitoring page is automatically refreshed every second.
Digital inputs can be used in discrete mode for monitoring the state of dry contact outputs devices
–
motion sensor, door contact, relay contact, alarm output etc.
Digital inputs can be used in counter mode for smart metering totalization.
NOTE: CONFIGURATION CHANGES MUST BE SAVED BEFORE LEAVING THE WEB PAGE. UNSAVED
CHANGES WILL BE LOST.
7.2
S
ETUP
7.2.1
SMS
SMS Alarm recipients can be set in this section.
The
“Master” has special
rights to change the device settings using SMS commands.
The remaining 4 recipients can receive SMS messages if any of the parameters is in alarm state. To
receive SMS messages, the number should be enabled in the checkbox
“Alarm
Notification”
. These 4
recipients can also ask by SMS for parameter state/value.
B
y pressing “send
test
SMS”
button all SMS recipients will receive a test SMS. All commands, their
syntax, and answers are described in
“Setup
via
SMS”.
7.2.2
Periodic check for SMS
To save the power, incoming SMS are checked on
“Check interval”
if this functionality is enabled.