Fastrack Supreme User Guide
Using the FASTRACK Supreme Plug & Play
confidential ©
Page: 36 / 77
5
Using the FASTRACK Supreme Plug & Play
5.1
Getting Started
5.1.1
Mount the FASTRACK Supreme
To mount the FASTRACK Supreme on its support, bind it using the holding bridles as shown in the Figure 12
below.
Figure 12: FASTRACK Supreme mounting
For the drill template, refer to Figure 18.
5.1.2
Set up the FASTRACK Supreme
To set up the FASTRACK Supreme, perform the following operations:
•
Insert the SIM card into the SIM card holder of the FASTRACK Supreme.
•
Lock the SIM card by sliding the lever towards the SIM card.
•
Connect the antenna to the SMA connector.
•
Connect both sides of the serial and control cable (15-pin Sub HD connector on the FASTRACK
Supreme side).
•
Connect the power supply cable to the external power supply source.
Note
:
For automotive application, it is recommended to connect the V+BATTERY line of the FASTRACK Supreme
directly to the battery positive terminal.
•
Plug the power supply cable into the FASTRACK Supreme and switch on the external power supply
source.
•
The FASTRACK Supreme is ready to work. Refer to Section 5.10 for the description of AT
commands used to configure the FASTRACK Supreme.