Omni cubed PRO-DOLLY HD1, Руководство пользователя

Страница: 4 / 9

5 4 omnicubed.com Pro-Dolly™ HD1 & HD2
MAINTENANCE INSTRUCTIONS
Regularly inspect the product for damage or signs of wear.
Ensure all screws, nuts, and bolts are securely fastened.
Regularly clean and lubricate all threaded components
and moving parts.
White lithium grease is recommended for
threaded components.
Closed wheel bearings do not require lubrication.
Prior to loading, identify and mark the
material’s center of mass. Center and
balance material on the main support rail.
(see fig. 1)
Use clamp to secure the dolly to material
during transportation. Turn the clamp
handle until finger-tight, then tighten by
hand about 1.5 to 2 turns more. Heavier
material may require a little more clamp
pressure if stability is an issue.
(see fig. 2)
For use in pairs, dollies can be spaced at
any distance apart, as long as the load is
distributed evenly between both dollies.
(see fig. 3)
.1
.2
Entretien
Inspectez régulièrement le produit pour détecter les
dommages ou les signes d'usure.
Assurez-vous que toutes les vis, écrous et boulons sont
solidement fixés.
Nettoyez et lubrifiez régulièrement tous les composants
filetés et les pièces détachées. La graisse de lithium
blanc est recommandée pour les composants filetés.
Les roulements de roue fermés ne nécessitent pas
de lubrification.
Mantenimento
Inspeccione regularmente el producto para detectar
daños o signos de desgaste.
Asegúrese de que todos los tornillos, tuercas y tornillos
estén firmemente sujetos.
Limpie y lubrique regularmente todos los componentes
roscados y las piezas móviles.
Se recomienda la grasa de
litio blanca para componentes roscados.
Los cojinetes de las ruedas cerradas no
requieren lubricación.
.3