10
DMAN-xxxx-xx
www.omnexcontrols.com
call toll free: 1-800-663-8806
Figure 9:
Joystick Message Posi-
tion Setup Menu – T300
Each of these menus shows a representation of the joystick/paddle/dial layout of the configured transmitter. Each joy-
stick, paddle, or dial position is labeled by a letter followed by the assigned BJM/EJM and BJM/EJM position (i.e., 1-
BJM1.1).
For example, in Figure 18, the ‘1’ dial position is assigned to BJM 1 (PGN 64982) position 1. BJM1 will indicate the value
of this dial in its position 1 (x-axis) field. Joysticks/paddles/dials that are not assigned to one of the BJM/EJM position
fields will indicate 0b1111111111 (10-bit).
The joysticks/paddles/dials may be assigned to different BJ/EJ messages or position fields within a message by typing
the appropriate number/letter (in this example 1) as shown in Figure 10
Figure 10:
Position 1 Setup Menu
J1939 Standard Joystick Message Configuration (continued)
Selecting the
Configure Paddle(s) / Trigger(s) / Dial(s)
(option 4), in Figure 2, displays, depending on the configured
transmitter type, a representative “graphical” menu. Figure 9 shows one for a T300 transmitter. See Appendix C for the
menus of other transmitter models.
CANbus Setup Menu:
1—Primary Address
2—Arbitrary Address Capable
3—Vehicle System Instance
4—Function Instance
5—ECU Instance
6—PGN Repetition Interval
7—Toggle Prop. Or Joystick Message
8—Configure Joystick Message
4—Configure Paddle(s) /
Trigger(s) / Dial(s)
0—Exit
Configure Paddle(s) / Trigger(s) / Dial(s)
CANbus Setup Menu:
1—Primary Address
2—Arbitrary Address Capable
3—Vehicle System Instance
4—Function Instance
5—ECU Instance
6—PGN Repetition Interval
7—Toggle Prop. Or Joystick Message
8—Configure Joystick Message
4—Configure Paddle(s) /
Trigger(s) / Dial(s)
Joystick Message Position
Setup
Menu
0—Exit
