Omicron VBO3, Руководство пользователя

Страница: 11 / 25

5 Wiring
You can connect VBO3 to CMC 430 test sets as well as to other OMICRON CMC test sets
( CMC 256plus , CMC 310 , CMC 353 , and CMC 356 ). Note, however, that the wiring and the
configuration in the Test Universe software are different depending on the respective use case. For
more information on how to configure the control software, see page 17 .
WARNING
Avoid serious injury or death caused by electric shock.
► The isolation of VBO3 is designed as a 600 V isolation. Therefore, only operate
VBO3 with primary voltages up to max. 300 V. Otherwise, output voltages higher
than 600 V might occur due to the voltage ratio of about 1 : 2.16.
► Always use the connection cables with 4 mm safety banana plugs (that are
included in the delivery) to connect VBO3 to a CMC test set.
► If you need to use other cables and/or connectors, always refer to the safety
instructions and user documentation of the respective CMC test set in use before
proceeding.
Wiring
OMICRON 11