omi PRE 15, Руководство по эксплуатации и обслуживанию, Страница: 13 / 35

Cod. 710.0048.31.01 – Rev.1A – 02.2018
ENGLISH
9 / 30
INTRODUCTION
This manual is an integral part of the refrigerator you bought, and must remain with the machine even if this will be
resold.
It is strictly recommended that the qualified* personnel for installation maintenance and/or control will fully comply
with the contents of this manual and the prevention and safety rules in force in the country where the system will be
used. In this way, not only the usage of the machine will be rational, but also the service will result cost effective.
In case your refrigerator will present any kind of problem, please contact immediately a Service Centre Authorised
by the manufacturer.
Please note that, when necessary, the use of original spare parts will ensure efficiency and long duration to your
refrigerator.
Due to the continuous technological evolution, the Manufacturer reserves the right to modify the specifications
contained in this manual without giving previous notice.
WARRANTY
Each product is delivered regularly tested, and covered by the warranty conditions specified on the sales list and/or
on the supply contract.
SYMBOLS USED IN THE MANUAL AND ON THE REFRIGERATOR
Nitrogen entry point Nitrogen outlet point
Read the Operators manual before attempt to start
up the machine and to perform any service
operation on the refrigerator.
Pay particular attention to components or systems
under pressure.
Pay particular attention to the indications preceded
by these symbols.
Pay particular attention to hot surfaces.
Installation, maintenance, and/or control operations
preceded by these symbols must be performed
exclusively by qualified personnel*.
Pay particular attention to the risk of electric shock.
Rotation direction of the fan. Explosion risk.
Pay particular attention to the risk of moving parts
Lifting point. Don’t lift from this point.
Attention: Before performing any
maintenance operation on this
machine, do not forget to disconnect
the electric supply, to completely
discharge nitrogen pressure, and to
refer to the Operators manual.
* Qualified personnel must be trained and certified in accordance with local laws and regulations.