On the home screen touch the manual tab scroll up and down
to get to your desired field press ok to enter and make
changes. It is always a good idea to reset fixture before using
the settings in this manual mode.
5.4 Information Tab
5.5 Manuel Tab
Display
On/Off
On turns off display after 60 sec.
Lamp On
On
Light turns on with fixture
Off
Bulb turns on through DMX controller
Linear Color
Off
On
Default
Settings
Click "OK" button and confirm load default
settings
Option
Instruction
Reset
Touch the manual tab, press the “Up” or
“Down” arrow scroll to reset press ok and
confirm
Press the
“OK” button, confirm reset
Color
0~255
Press the
manual tab, use the “Up” or
“Down” arrows to scroll to desired
field press the “Ok” make changes
then press “Ok” once more to store
new changes.
Shutter/Strobe
0~255
Dimmer
0~255
Gobo
0~255
Prism
0~255
Prism Rotate
0~255
Macro Function
0~255
Frost
0~255
Focus
0~255
Pan
0~255
Pan Fine
0~255
Tilt
0~255
Tilt Fine
0~255
Pan/Tilt Speed
0~255
Gobo speed
0~255
Manual
Lamp control
On
Off
Option
Instruction
Firmware
Version
Current software version
Total Fixture
Hours
Touch
the system tab use the “Up & Down” arrows
scroll to total fixture hours
Partial Fixture
Hours
Touch the system tab use the “Up & Down” arrows
scroll to partial fixture hours
Total Lamp Hours
Touch the system tab use the “Up & Down” arrows
scroll to total lamp hours
System Error
If the red ERR led turns on, there is an operational
error, The details on the error can be viewed in the
systems error field under the systems tab.
