Omer Kar 350, Руководство по эксплуатации и обслуживанию

Страница: 35 / 45

5. USE
Attention to:
- USER
- OPERATOR / SPECIALIZED TECHNICIAN
5.1 Operation commands
I SYSTEM MAIN SWITCH
Activating this switch, the control panel in enable
PS TABLE UP BUTTON
Activating this switch, the vehicle lift begins lifting
PDA LT DOWN BUTTON
PDB
1 By pressing the button PDLTA , the auxiliary lift LT
a) Start the lowering
b) Stops when the LT platform is about 120 mm from floor
2 The lamp SLPDLT turns on
Press together the buttons PDLTA & PDLTB , in order to end the last lowering phase; the
buzzer sound (BZ)
PEFT
CUT-OFF KEY SWITCH PHOTOCELLS
The tables are provided with photocells to check platform synchronization.
If there is a difference in height of more than 50 mm, the photocells interrupt the electric circuit
that powers the control unit (24 volts).
Use the PEFT key to exclude the photocells; in this case, by keeping the PEFT button turned it
is also possible to perform the upstroke (PS) and downstroke operations (PD)
BZ BUZZER
PL LIGHT SWITCH
PROCEDURE WHEN PURPOSE
SEE YOU SEE YOU
PROCEDURE WHEN PURPOSE
CHAPTER PARAGRAPH
Platforms
levelling
once a
week
To replace the normal outflow of
the hydraulic components
Maintenance Platforms levelling
Manual checks
of the photocells
Once a
day
To check the correct functioning
of the photocells
Maintenance Photocells
PEFT
PL
BZ
I
PDB
PDA
PS