Reproduction of part or all of the contents of this document in any form is expressly prohibited other than for individual use only. All text, images and labels are property of Nimax Gmbh.
4. Replacing the battery.
The red-dot needs to be bright enough to be seen during the observation.
After some hours of use the brightness may dim until it no longer can be seen. The battery needs to
be replaced. Turn the potentiometer OFF. Now remove the battery cap and the battery from the
battery compartment and replace with a new battery (figure 9 and 10). Make sure the battery clip
has solid contact with the battery base. Place the plastic battery cap back to protect the battery.
Turn the potentiometer ON and check if the red-dot is brighter now. When not in use the
finderscope should always be powered OFF to prolong the battery’s life.
Figure 9. Remove battery.
Figure 10. Place battery.
