OMEGAbilance Freestyle, Руководство пользователя

Страница: 21 / 47

The automatic tare and manual tare, set before calling a PLU, override the tare value associated
with the PLU itself.
The values of the deducted tare will be printed, together with the other metrological data, on the receipts or
labels issued by the scale.
PLEASE NOTE :
The tare value must be compatible with the metric division of the scale: the tare must in fact be a
multiple of the metric division. If this condition is not respected, the error message 'Illegal Tare' is
given; after this signaling, in order to allow the use of the article in question, the PLU will be
displayed setting the tare to zero.
BLOCKING THE TARE
If you want to keep the TARE values for several weighs, just press the key "FIX " thus controlling the block of
the set value. The repetition of the maneuver will command its "unlocking". The spy "BT " it will indicate the
presence of the TARE BLOCK.
IMPORTANT: According to the regulations in force, it is not allowed to use the Tare block for scales
used in direct sales to the public.
TRADITIONAL OPERATION
The TRADITIONAL operating mode requires the use of both a continuous roll of paper (normal or
adhesive) and a roll of labels.
STORAGE OF WEIGHS
Each operator carrying out a transaction on any scale in the system will command the storage of
data relating to the WEIGHT, TARE, PRICE, AMOUNT and CODE of the product being weighed.
These data will be temporarily stored until the service is closed, completing the operation by printing a receipt.
This operation can be followed by the operator and the customer on the scale viewers made available to them.
The operator's initials, the number of items purchased by the customer and their relative accumulated total
will appear on these displays to confirm that they have been stored.
In case of failure to store, a specific message will indicate any error or anomaly. By pressing the key "
TOTAL" and by selecting the corresponding operator key, a receipt / label will be printed showing, in
addition to the header, also the Total relating to the amounts of the individual transactions and their
number, the date of issue, the bank number and the code or operator name.
REOPENING OF THE RECEIPT
When the service is closed, by pressing the key
by selecting the corresponding operator, it is possible to reopen the last service performed in order to add the
amount of the products that the customer had forgotten to order or to cancel data incorrectly entered.
At the end of the maneuver, the key "TOTAL" and the identification of the operator will generate the issuance
of a second receipt, numbered progressively with respect to the previous one, which will report all the
transactions of the first receipt and those added after reopening, less any data reversed.
for Advance models or
RC
for Extreme models, and
REVERSE OF WEIGHTS ALREADY MADE
The scale allows the operator to cancel the data of any of the weighs carried out belonging to the service in progress
or to the one reopened by operating with the following procedure:
1) at service in progress :
- by pressing the key
operator, all the transactions carried out by the operator will be shown on the display
- by pressing the keys " - "and" - "(arrow down and arrow up) the operator will explore the lines of the receipt
- selected the transaction, by pressing the key "ENTER " the transaction is reversed
for Advance models or
ST
for Extreme models, followed by identification
- the button "C. ”Or the key
will return the scale to normal operation.
Transactions canceled will not be totalized.
2) Reopening the service :
- reopen the receipt using the key in
the previous case.
for Advance models or
RC
for Extreme models, and operate as
Page 21 of 47
Man. Use Freestyle-rev03