OMEGAbilance Freestyle, Руководство пользователя

Страница: 13 / 47

THE
INSTALLING THE SCALE
TO
LIMENTATION
The installation of the "OMEGA Freestyle" scale must be done with great care and attention, in
order to ensure maximum operating safety of the equipment.
Therefore it is essential to strictly observe the following rules:
-
Power the scale only with the power supply supplied, this power supply must be connected to a
preferential line (220 V±10% - 50 HZ) that starts directly from the meter or from the distribution
panel avoiding that the same connects other equipment with high absorption (refrigerator
compressors, slicers, neon lamps, etc.). The power supply line of the instruments must be
connected to a single electrical phase to avoid imbalances in the interconnections of the scales.
-
Install a socket with side earth contacts (SCHUCO) for each scale; the connection to the earth
line is essential to allow the OMEGA Freestyle scale to work correctly. It is also advisable that
auxiliary sockets useful for test instruments are available near the scales.
ATTENTION! AN ELECTRIC LINE WITHOUT AN EARTH WIRE COULD CAUSE IMPROPER OPERATION
OF THE SCALE OR DAMAGE TO ITS ELECTRONIC CIRCUITS. THEREFORE, WE DISCLAIM ANY
LIABILITY FOR ANY OPERATING DEFECTS OR FOR ACCIDENTS TO THE OPERATORS RESULTING
FROM THE NON-COMPLIANCE OF WHAT WE RECOMMEND.
SWITCHING ON THE SCALE AND AUTOMATIC ZEROING
The switching on of the scale must be carried out only with the plate unloaded, clean and without objects above it and the
scale will be placed with the weight system at “zero”.
By selecting the power key, the scale loads the operating system and starts automatically. Both the operator
display and the customer display will show in sequence some boxes containing the messages relating to the
scale start-up operations. Such messages indicating the completion of the various initialization operations,
including:
During this phase, the operator's side display shows the following display sequence:
-
turning on the scale
This image remains present during the first phase of switching on the scale in which the system is loaded. In
the next phase, the scale presents the initialization phases on the operator display.
Page 13 of 47
Man. Use Freestyle-rev03