![background image](http://html1.mh-extra.com/html/omega/zed/zed_user-manual_3987687071.webp)
INTERFACE SPECIFICATIONS (zCDR)
Ethernet:
Standards Compliance IEEE 802.3 10Base-T (RJ45)
Supported Protocols:
TCP/IP, ARP, ICMP, DHCP, DNS, HTTP, and Telnet
LED Indicators:
Network Activity, Network Link, Diagnostics, Receive and Power
Management:
Device configuration and monitoring through embedded WEB server
Embedded WEB Server:
Serves WEB pages (Java™ Applets) containing real-time data
and live updated charts within definable time intervals
WIRELESS COMMUNICATION
Standard:
IEEE 802.15.4, DSSS
Frequency:
2.4 GHz (2400 to 2483.5 MHz), 16 channels
Network Topology:
Star Topology
Radio Power Output:
100 mW (20 dBm); 10 mW (10 dBm)
Limitations on Equivalent Isotropic Radiated Power (EIRP) levels in the European
Community and other countries applies. An improper combination of power level can
result in an EIRP above the allowed amount per regulations. See
Appendix H
.
Data Rate:
Bit rate 250 Kp/s; Symbol rate 62.5 Symbol/s;
Chip rate 2000 kchip/s
Modulation:
Orthogonal Quaternary Phase Shift Keying (O-QPSK)
Receiver Sensitivity:
-100 dBm
Range:
zED
Up to 91 m (300 ft) without obstructions or interference
zED-P/-LCD/-H
Up to 1000 m (3280 ft) without obstructions or interference
-AA/-CCELL/-DC-H2
The above ranges assume a line-of-Sight (LOS) between the Meter/Receiver and
End Device without obstructions or interference at which the diagnostic signal
strength web interface registers approximately 25%.
Antenna Frequency:
2400 to 2500 Mhz
Impedance:
50 ohm
Connector:
Reverse Polarity SMA Plug
Emission Designation:
2M00M1D
Channel Spacing:
5 MHz
POWER (zCDR)
Power Input:
9 to 12 Vdc
Consumption:
2.5 W max.
Safety Qualified ac Power Adapter (included)
Nominal Output:
9 Vdc @ 0.5 A
Input:
100 to 240 Vac, 50/60 Hz
65