Omega WiFi Amp, Официальное руководство пользователя, Страница: 7 / 29

Click on the ‘Apply’ button. Wait for a few seconds as the Omega WiFi Amp restarts. Once the
unit has turned back on, it is ready for use.
*We suggest that your current WiFi Security Key should not include strange symbols such as $
*& ^ , as these might lead to a failed configuration. Characters and numbers are highly
recommended.
Step 8. Wireless Repeater mode configure successfully!
*The default wireless SSID and security key is the same as your AP/router, after successful
installation.
*The Management Page will be locked after your successful configuration. You CANNOT log
into the management page via http://192.168.10.1. If you want to log into the Management
Page again, please hold the
‘Reset’ button for 8-10 seconds to make all settings revert to
Factory Default Settings. Once the unit has reset, reconfigure the Omega WiFi Amp again.
Step 9. Go to your available Wireless connections (i.e. just like in Step 2) and connect to the
wireless connection called “YourSSID_ext”. Completing this step will add your computer to
your main network via the Omega WiFi Amp device.
Example: If your main Wi-Fi network at home has an SSID called “MacNeice”, after
configuring the OWA using the steps above, you should now have a “MacNeice_Ext”
connection. The “MacNeice_Ext” will be the Omega WiFi Amp and the correct netowkr to
connect to if you wish to use the Omega WiFi Amp connection.
Omega WiFi Amp - Official User Guide - 1_en
Page 5 of 27