16 |
P a g e
5.1.2.1
Data Type
The 4-bit Data Type field determines the type of data of the specific sensor.
5.1.2.2
Factory Calibrate
Factory calibration is used on the SP-016 process inputs. Clearing this bit will disable the factory calibration values.
5.1.2.3
Sensor Writeable
The writable bit is cleared, indicating that the sensor values may not be overwritten.
5.1.2.4
Smart Sensor
Refer to the Smart Sensor Device Interface documentation.
5.1.3
Heat Flux Input Configuration
Digital Configuration
7
6
5
4
3
2
1
0
Available
Assigned
Apply
Scaling
Lock
Sensor Range / Type
0
*
?
?
(Internal Use Only)
5.1.3.1
Apply Scaling
For more information on Gain and Offset, refer to the Smart Sensor Manual. If set, the user-defined Offset and
Gain values will be used to adjust the sensor reading:
Result = (Raw Reading * Gain) + Offset
5.1.3.2
Lock
If set, the user-specified units of measure string (4-character maximum) will be used in place of the default units
of measure.
5.1.3.3
Assigned
Refer to the
Smart Sensor Device Interface
documentation.
5.1.3.4
Available
Refer to the
Smart Sensor Device Interface
documentation.
5.1.4
Heat Flux Sensor I/O Byte
For Heat Flux I/O types the Device Byte field determines the signal types for each of the channel bits.
Heat Flux I/O Byte
7
6
5
4
3
2
1
0
0
0
0
Open Circuit Detect
0
Disabled
1
Enabled
0
0
0
0
