![background image](http://html1.mh-extra.com/html/omega/psw1110-series/psw1110-series_user-manual_4092904009.webp)
3.2.2 Setting Zero Pressure
Without any external pressure applied (open to the atmosphere)
simultaneously press and hold the
adjusting
key
and the
carry
key
for more than 3 seconds. This captures the pressure
and resets the display to read zero at this pressure.
3.2.3 Parameter Setting Mode
To enter the
parameter setting mode
, press and hold the
Setting key
for more
than 3 seconds when in default
pressure
display mode
.
Note:
Must be in pressure display mode for this keystroke to perform this function.
3.2.4 Setting Pressure Units
The first parameter encountered when entering the parameter setting mode is
pressure units. To set the pressure unit, scroll through the options by pressing the
adjusting
key
until the setting that matches the desired unit is displayed. The
table below shows the setting value for each pressure unit option. Once the desired
setting is displayed, press the
setting
key
. The displayed setting will be entered
and the next parameter setting (temperature) will be displayed.
Setting P-1
P-2
P-3
P-4
P-5
P-6
P-7
P-8
Unit
psi
bar
kg/cm2 KPa
MPa
inHg
cmHg Atm
3
-
2-2
Содержание PSW1110 Series
Страница 7: ...2 3 Electrical Connections 2 3...