background image

 

Section 1 

– Introduction 

 

1.1 

Product Overview 
 

The PSW-1110 series are cost-effective, digital pressure switches that are easy 
to read, easy to program, and perfect for small spaces. 
 
These miniature pressure switches provide PNP output switch control for non-
corrosive gasses. The PSW-1110 features a bright 4-digit, 7-segment display 
that makes it easy to see the current pressure. The display can also be 
programmed to turn red or green, based on the switch state, and there are two 
LED indicator lights to show when outputs are activated. In short, this miniature 
pressure switch has several visual indicators that can quickly show the status at 
a glance.  
 
The ultra-compact size and multiple pressure port orientations make this unit 
easy to install practically anywhere. There are both a horizontally and vertically 
oriented pressure ports so that the most convenient orientation and be used, and 
the unused port is plugged with the included setscrew. As an added bonus, the 
switch also measures the media temperature and can be set to measure in either 
Celsius or Fahrenheit. There is a keypad locking function, to secure against 
unwanted button presses or changes made by those unfamiliar with the unit. 
 
The PNP outputs are fully programmable, and the user can also select one of 
eight pressure units: psi, bar, kg/cm2, KPa, MPa, inHg, cmHg, and Atm. There 
are four options for output modes. The main options are hysteresis and window 
modes, and each of those have high and low methods of actuation. See the 
Operation Modes section below for more details and the product manual for 
operation instructions. 
 
The PSW-1110 is also available with the following options: additional pressure 
ranges, NPN outputs, alternate pressure port thread types, and with liquid media 
compatibility. If you would like to learn more about these options or require 
further customization of this design, contact us by phone or by emailing us at 
[email protected]

 

 

 

 

TABLE OF

CONTENTS

Digital,Miniature Pressure

 Switch with Display 

PSW1110

1-1

Содержание PSW1110 Series



















Отзывы: