Omega PHCN-961, Руководство пользователя, Страница: 39 / 46

39
6.2 PARAMETER SETTING AND FACTORY PRELIMINARY VALUE
NO. Indication Parameter
Name
Symbol Contents Remark Valid range Factor
y value
01 LOCK LOC Password for entering function 0 ~ 200 0
02 ATC AtC Auto temperature compensation ON/OFF OFF
03 TSET1 tSt1 Temperature set up of manual -10.0
~
100.0
°C
25.0
04 TSET2 tSt2 Calibration temperature set up
Only valid for manual
0.0 ~ 60.0 °C 25.0
05
P1
TC
TOFS tOFS Temperature measurement offset Only valid for manual -10.0 ~ 10.0 °C 0.0
POFS POFS PH value measurement offset Only valid for PH mode -2.00 ~ 2.00PH 0.00 06 P2
OFS
VOFS VOFS mV value measurement offset Only valid for ORP mode -200 ~ 200mV 0
07 CTYP CtyP Type of current output 0/4
~
20mA 4
08 CURL CUrL Low limit of transmitting output -1999 ~ 1999 0
09
P3
CUr
CURH CUrH High limit of transmitting output
PH mode: 0.01PH unit
ORP mode: 1mV unit -1999 ~ 1999 1400
10 P4Cntr CNTR Cntr Control way of relay 1, 2 PLC/ Lit Lit
11 SP1 SP1 Way set up of relay 1 HI / LO LO
12 SP1U SP1U Setting value of relay 1 -1999
~
1999 400
13 SP1D SP1d Relay 1 hysteresis / proportion
PH mode: 0.01PH unit
ORP mode: 1mV unit 0 ~ 200 ( 2.00 ) 10
14
P5
SP1
SP1T SP1t Relay 1 circle (second) Only valid for PLC 0 ~ 200 seconds 20
15 SP2 SP2 Way set up of relay 2 HI / LO HI
16 SP2U SP2U Setting value of relay 2 -1999 ~ 1999 1000
17 SP2D SP2d Relay 2hysteresis / proportion
PH mode: 0.01PH unit
ORP mode: 1mV unit
0
~
200
(
2.00
)
10
18
P6
SP2
SP2T SP2t Relay 1 circle (second) Only valid for PLC 0 ~ 200 seconds 20
19 R3OP r3OP Working mode of relay 3 OFF/SP1/SP2/
ALL/CAL/CLE
CAL
20 INT HOr Interval (hour) valid for calibration and
cleaning mode
0-999 100
21
P7
rL3
DUR SEC Operating time (second) valid for cleaning mode 0-200 30
22 FUNC FUnC PH / ORP/mV select PH/ORP/mV PH
23 SENS SenS Antimony / glass electrode select Anti/GLAS GLAS
24
P8
CONF
BUFF buFF USA/nST standard select
Only valid for PH mode
NST/USA USA
25 NB nb Set ID number for 485 0-63 1
26
P9
ID
BT bt Communication rate 0-7 5
27 P10
DEF
DEF dEF Reverting to factory default
setting
Reset to factory default
parameter.
YES/NO NO