- 12 -
4
、
You should select a cooking temperature and function that is appropriate for the food that you are cooking. You should
also ensure that the food is placed in an adequately sized dish and that you use the drip tray where appropriate.
5
、
To clean the surface of steam oven, also use the sponge or soft cloth with hot suds instead of abrasive detergent.
Replace bulb
Warning: Before replacement, make sure the power supply to the steam oven must be turned off, and wait till
the case body and bulbs are cool.
1
、
Rotate out the lamp cover counterclockwise.
2
、
Rotate out the bulb counterclockwise.
3
、
Change a new bulb in 25W/300°C with E14 screw socket.
4
、
Do not use bulb in other type.
5
、
Assemble the seal ring and grading ring on the lamp shade in sequence, tighten the lamp shade clockwise,
then turn on the power supply to the oven.
6
、
Replace the damaged glass lamp shade, grading ring or seal ring timely.
Replace the door gasket
The door gasket is easy broken and leak air after a long time use , it must be replaced timely in case any damage.
1. Open the door and take down the old gasket.
2. Align the new gasket at the slot, make the seam of gasket on the side, and press down the gasket in place.
3. After pressing down the gasket, pull it gently to check if it is fully fastened.
Installation
The steam oven should be installed by professional person.
Current standard
Before power on, please ensure the supplying
alternating current
should comply with the rated voltage which marked on
label.
Warning: The steam oven must earthing.
If you need to change the power cord of steam oven, the
earthing conductor must 10 mm longer than the wire.
Pay attention to ensure that the temperature of the
alternating current line
no more than 50
℃
.
If the
alternating current line was broken and need to replace it, you can buy it from distributors.
