Omega ORCG60MB, Инструкция по эксплуатации

Страница: 6 / 15

6
Installation Instructions
WARNING : Failure to install the screws or fixing device in accordance with these instructions may result in
electrical hazards.
MOUNTING OF THE V-FLAP
If the cooker hood does not have an assembled V-flap 1, you should mount the half-parts to its body. The
images only show an example of how to mount the V-flap, because the outlet may vary according to
different models and configurations.
To mount the V-flap 1 you should:
1. Mount two half-parts 2 into the body 6.
2. The pin 3 should be top oriented.
3. The axis 4 should be inserted into the holes 5 on the body.
4. Repeat all the operations for the 2nd half-part.
INSTALLATION
If you have an outlet to the outside, your cooker hood can be connected as below picture by means of an
extraction duct (enamel, aluminium, flexible pipe or non-flammable material with an interior diameter of
150mm).