![background image](http://html1.mh-extra.com/html/omega/orc93xa/orc93xa_instruction-manual_4069550008.webp)
8
Operating Instructions
The re-usable aluminium grease filters supplied with this rangehood should be cleaned every month or so
to avoid grease build-up.
To remove the grease filter, release the locking mechanism at the front of the filter, and lower the filter
slightly to unhook it at the back.
Whilst the filter is removed, clean off any residual grease from the housing to avoid fire risk.
When replacing the grease filters, ensure that the locking mechanism is facing down.
ORC93XA
The range hood has indication diagrams to allow you to easily select the fan operating speed required.
Push the low button, indicated by a fan with 3 blades, and the motor will run at a low speed.
Push the medium button, indicated by a fan with 4 blades and the motor will run at a medium speed.
Push the high button, indicated by a fan with 5 blades and the motor will run at a high speed.
Push stop button, indicated by an (O) and the motor will stop. Push the light button, indicated by a lit globe
and the two lights will come on. Push it again and the light will turn off.
9
Operating Instructions
ORC94XBA
The ORC94XBA has a touch control panel.
When the power is connected and switched on you will hear a beep and the display screen will be backlit
for 30 seconds and the rangehood will go into standby mode.
SETTING THE TIME (24 hour time)
In standby mode hold down the Timer button (2-3 seconds) until the Hour symbol on the display screen
starts to flash.
Touch the Add/ON or Dec/OFF (-) buttons to adjust the hour. Touch the Timer button once the hours
have been set this will allow you to adjust the minutes by touching the Add/ON or Dec/OFF (
-
) buttons.
ADJUSTING THE MOTOR SPEED
•
Touch the Add/ON button and the motor will run at low speed and the display screen will show
.
•
Touch the Add/ON button again and the motor will run at medium speed and the display screen
will show
.
•
Touch the Add/ON button a third time and the motor will run at high speed and the display screen
will show
.
You are able to decrease the motor speed by touching the Dec/OFF button (
-
). Keep touching the Dec/OFF
(
-
) button until all the bars disappear and the motor will stop and the rangehood will go into standby mode.
LIGHT
The lights work independently of the other functions. Push the light button
and the two lighting lamps
will come on the display screen will also show a light symbol. Push it again and the lamps will turn off.
TIMER
The timer can be used to turn off the rangehood automatically after a period of time (5, 15 and 30 minutes).
Note
: The timer does not affect the lamps.
While the rangehood motor is running in any speed press the Timer button and the display screen will
show
, press the Timer button again and the display will show
, press the Timer button
again and the display will show
. If the Timer button is pressed again the display will go back to show
.
Содержание ORC93XA
Страница 1: ...Instruction Manual 90cm Canopy Rangehood ORC93XA ORC94XBA ...
Страница 16: ...1 ...