Omega OO885XR, Инструкции по эксплуатации и монтажу

Страница: 9 / 22

6
INSTALLATION
!
CAUTION:
THIS APPLIANCE MUST BE INSTALLED BY A PROFESSIONAL ELECTRICIAN, AND IN ACCORDANCE
WITH THE MANUFACTURER’S INSTRUCTIONS.
BEFORE CARRYING OUT ANY ADJUSTMENT OR REPAIR ON THE APPLIANCE, MAKE CERTAIN IT IS
DISCONNECTED FROM THE POWER SUPPLY.
Statutory regulations, technical standards, directives
The appliance must be installed in conformity with current statutory regulations and in accordance with applicable
safety standards.
Installing the oven
The unit in which the oven is installed must be manufactured to a modular dimension of 600mm.
Openings of at least 50mm deep must be cut both in the bottom and in the top of the unit to ensure adequate
ventilation (see below figure for essential dimensions).
During assembly, particular care must be taken not to pick up the oven by the door. As a general rule, the oven door
should never be forced or subjected to undue stresses.
The oven must not be installed behind a decorative door in order to avoid overheating.