15
ELECTRICAL CONNECTIONS
Before connecting the oven to the mains power supply, make sure that:
- The supply voltage corresponds to the specifications on the data plate on the front of the oven.
- The mains supply has an efficient earth (ground) connection complying with all applicable laws and re-
gulations. Correct earthing (grounding) is a legal requirement. If the appliance is not pre-fitted with a power
cable and/or plug, use only suitable cables and plugs capable of handling the power specified on the appliance’s
data plate and capable of resisting heat. The power cable should never reach a temperature 50
°
C above ambient
temperature at any point along its length. If the appliance is to be connected directly to mains terminals, fit a
switch with minimum aperture of 3 mm between the contacts. make sure that the switch is of sufficient capacity
for the power specified on the appliance’s data plate, and compliant with applicable regulations. The switch must
not break the yellow-green earth wire. The socket or switch must be easily reachable with the oven fully
installed.
*
CABLE TYPES AND DIAMETERS
230V H05RRF 3 x 1,5 mm
2
*
H05RN-F
400V 3N
*5 x 1,5 mm
2
400V 2N
*4 x 2,5 mm
2
230V 3
*4 x 2,5 mm
2
230V
*3 x 4 mm
2
N.B. The manufacturer declines all responsibility for damage or injury if the above instructions and normal
safety precautions are not respected.
