10
The end of cooking time
Fig. 4
The end of cooking time can also be set. This works as part of a programmed time.
Press the central button for 3 seconds. Press the central button twice consecutively and wait for “End” to
appear (fig. 4). Press “+” and “-” to set the required end of cooking time.
The oven will work in the set mode and at the set temperature until the end of cooking time.
Setting Programming automatic cooking
Fig. 5
Cooking function with set times
Firstly your cooking mode and temperature should be set.
Press the central button for 3 seconds. Then press it again until “dur” appears (Fig.5). Press “+” and “-” to
set the required cooking time. Wait 2 seconds for the setting to be memorized.
Press the central button again, “End” will appear (fig. 4). Press “+” and “-” to set the required end of cooking
time.
The oven will switch off and the word AUTO will appear in the display.
E.g.:
Current time: 12.30
Cooking time: 10 minutes
End of cooking time: 14.00
The oven will start cooking at 13.50 (14.00 less 00.10) at the set temperature and in the set mode and will
stop at 14.00
The oven will beep when it stops cooking. To disable it, press any button.
Alarm Timer
You can set this timer to sound a buzzer after 0 to 60 minutes of cooking. First turn the knob fully clockwise,
then turn it back to the desired alarm time
Setting an oven function manually
Turn the mode knob into the desired position, the clock display shows
On
for a few seconds. The oven will
work for a maximum time (12hours). Depending on the oven model, the number and type of available
functions can be different.
If the selected function works using any heating elements, the
symbol is displayed (it doesn’t appear in light
and defrost position).
Turn the Temp & Time selector and set the desired oven temperature.
The control offers a PRESET temperature per every cooking mode or a full range between MIN and MAX to
be adjusted by hand. Check the value on the display after having selected the temperature.
The temperature appears on the clock display for about 5 seconds when the Time & Temp selector is pushed
or when a new function has just been selected.
As soon as the oven starts, the preheat led (indicated by the bars) on the left side of the clock display starts
flashing and becomes steadily on when the preheat ends.
Turn the mode selector to ZERO (OFF) position to stop any activity, the display will show
OFF
for a few
seconds.
