Omega OMEGAFLEX FPU100 Series, Руководство пользователя, Страница: 4 / 12

3
FPU SERIES
ROLLER AND TUBING SELECTION
4
FPU SERIES
ROLLER & TUBING SELECTION
Use the following color coded rollers with the appropriate tubing ID:
Roller Color Tubing ID mL Per Revolution
Black
1
⁄
4
" 3.5
Black
3
⁄
16
" 2.1
Red
1
⁄
8
" 0.84
Red
1
⁄
6
" 0.21
Instructions for 1/16" Tubing Assembly
Insert 1 ⁄
16
" tubing into the sleeve and pull out desired length of 1 ⁄
16
"
tubing. Secure
1
⁄
16
" tubing by placing the tie fastener approximately
1
⁄
4
"
from one end of the sleeve and tighten fastener so that 1 ⁄
16
" tubing is not
easily moved. Be careful not to collapse the inner tubing by over-
tightening the tie fastener. Install the tubing with the tie fastener on the
inlet side of the pump.
Make sure the tie fastener is on the outside of the pump
housing and is not interfering with the roller assembly.
N O T E
PLASTIC TIE FASTENER
1/16" I. D. TUBE
3/16" I. D. SLEEVE