manualshive.com logo in svg

Omega OMB-PER-488/W95, Руководство пользователя

Поделиться
Скачать
Omega OMB-PER-488/W95 Скачать руководство пользователя страница 105

Personal488 User's Manual For Windows 95 and Windows NT 

API Command Reference    99

Reset

Syntax

INT WINAPI Reset(DevHandleT devHandle);

devHandle

 refers to either an interface or an external device.  If 

devHandle

 refers to an

external device, the 

Reset

 command acts on the hardware interface to which the

external device is attached.

Returns

-1

 

if error

Mode

Any

Bus States

None

Example

errorcode=Reset(ieee);

See Also

Abort, Term, TimeOut

The 

Reset

 command provides a warm start of the interface.  It is equivalent to issuing the following

command process, including clearing all error conditions:

1.

 

Stop.

2.

 

Disarm.

3.

 

Reset hardware (resets to Peripheral if not System Controller).

4.

 

Abort

 (if System Controller).

5.

 

Error ON.

6.

 

Local.

7.

 

Request 0

 (if Peripheral).

8.

 

Clear 

Change

, 

Trigger

, and 

Clear

 status.

9.

 

Reset I/O adapter settings to installed values (

BusAddress

, 

TimeOut

, 

IntLevel

 and

DmaChannel

).

Содержание OMB-PER-488/W95

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды