LCD SCREEN SHOTS
ADDITIONAL FUNCTIONALITY
When the user cycles through to the Recieved Signal Strength Indicator (RSSI) screen the unit automatically transmits a dummy message
every 2 seconds to enable an RSSI reading to be displayed. If there is any outstanding data waiting to be transmitted, this data will be sent
at the same time but if not it’ll just send the dummy message and the next data package will be sent as per the unit configuration.
When on Max or Min screen, holding the button for 3 seconds will clear the stored values.
The sensor can be restarted by holding the button for 10 seconds until the screen blanks and LOW is shown flashing in the top right hand
corner of the display. The sensor will retain all settings but will lose any data that has not been transferred to the PC. The sensor can be
reset to factory state by holding the button for 20 seconds but this will delete all settings and stored data.
Note: neither the restart or the reset will delete data already transferred to your PC.
www.omega.com
Specifications liable to change without prior warning Data Sheet - Issue 01 06/2012 S.T.L Applies to OM-EL-WiFi-TH Page 3 of 3
