
Revision 1.0.3
Page 18
6.9.
Configuration of a OM-93 Logger (Start at Specified Time)
You can configure a device so that it starts at a specific time. Configure as per section 6.4 but select At
Specified Time. Fill in the exact month, day, hour, minute and seconds when you want the logging to
start.
Remember to write the setup to the logger by pressing the Configure Button.
When you have disconnected the logger and the time reaches the desired start time for the logging then
the logger will begin to log. This is a perfect way to have multiple loggers start logging at exactly the
same time.
Figure
17:
Configuration
Step
(Start
at
Specified
Time)