Temperature/Event Adapter
5
Press and hold the
R E C O R D
button until the record display appears. The four
recording modes can be scrolled and changed by using
S T A T U S
button:
1.
Record information to memory only.
This
option stores information into the Service
Logger memory. No printer or computer
connection is required for this function.
2.
Record information to a printer.
This option
does not store information into memory but
does print each sample as it is
recorded
to a
printer. This is referred to as REAL TIME
PRINTING.
A printer must be connected for
this function!
If no printer is connected, or if
the printer is
off-line
, or if the printer is out of
paper an error message will be displayed to
alert the user to a problem. Switching to this
option will
terminate recording
if the Service
Logger was set to record previously.
3.
Record information to memory and to a
printer.
This is a combination of options 1
and 2. Information is stored in memory and at
the same time each sample is
recorded
to a
printer. As in option 2 a
printer must be
connected
and functioning or an error message
will be displayed.
4. If a recording is in progress, this option will
terminate all
recording functions
. This
option may also be used if the user decides to
terminate a recording session and return to the
operating mode. In order to terminate a recording
press the
M E N U
E N T E R
button again at this time.
Press the
R E C O R D
button after selecting the
recording mode. This will display the starting
time of the recording. The display will show the
starting time of the last recording and allow the
RECORD ON, REAL
TIME PRINT OFF
RECORD OFF, REAL
TIME PRINT ON
RECORD ON, REAL
TIME PRINT ON
RECORD OFF, REAL
TIME PRINT OFF
DAY HOUR MIN
FRI 15 16
