![background image](http://html1.mh-extra.com/html/omega/om-143/om-143_user-manual_4182665008.webp)
Display Legend
:
indicates reading is higher than high alarm setpoint
for that parameter
▼
▼
:
indicates reading is lower than low alarm setpoint
for that parameter
%RH
: relative humidity unit
°C
: Celsius temperature unit
°F
: Fahrenheit temperature unit
[-]188.8
: Humidity or temperture value or one of the
following four working status indications
LOG
: Unit is logging data
- - -
: Unit is in standby mode, ready to log data
FUL
: Internal memory is full (and logging has been
stopped)
CON.
Unit needs to be configured by software
SETUP INSTRUCTIONS
INSTALLING/REPLACING THE BATTERY
The OM-143 uses a 3.6VDC “1/2 AA” Lithium-ion battery.
To open the battey compartment,
use a paper clip or a
screwdriver with a fine point to push in the silver flange
showing through the small square hole in the rear of the unit
7
Fig. 1b .
All possible
display
indications
on the OM-143
LATCH