![background image](http://html1.mh-extra.com/html/omega/of910fxcom/of910fxcom_instruction-manual_4055349005.webp)
2
Important Safety Warnings
1.
Food can spill when foot of oven is dismantled or gets broken, be careful. It may cause personal injuries.
2.
During usage, the internal and external surfaces of the oven get hot. As you open the oven door, step
back to avoid the hot vapour coming out from the interior. There is risk of burning.
3.
Upper cover of the oven can be closed for a reason, than cookware can trip over. Step back to avoid the
hot food coming on you. There is risk of burning.
4.
Do not place heavy objects when oven door is open, risk of toppling.
5.
User should not dislocate the resistance during cleaning. It may cause an electric shock.
6.
Do not remove ignition switches from the appliance. Otherwise, live electric cables can be accessed. It
may cause an electric shock.
7.
Oven supply can be disconnected during any construction work at home. After completing the work, re-
connecting the oven shall be done by authorized service.
8.
Do not place metal utensils such as knife, fork, spoon on the surface of the appliance, since they will get
hot.
9.
To prevent overheating, the appliance should not be installed behind of a decorative cover.
10.
Turn off the appliance before removing the safeguards. After cleaning, install the safeguards according to
instructions.
11.
Cable fixing point shall be protected.
12.
WARNING
: Don’t use oven and grill burners at same time.
13.
Please don’t cook the food directly on the tray / grid. Please put the food into or on appropriate tools
before putting them in the oven.
14.
Hot surface, leave for cooling before closing the cover.
Electrical Safety
1.
Plug the appliance in a grounded socket protected by a fuse conforming to the values specified in the
technical specifications chart.
2.
Have an authorized electrician set grounding equipment. Our company shall not be responsible for the
damages that shall be incurred due to using the product without grounding according to local regulations.
3.
The circuit breaker switches of the oven shall be placed so that end user can reach them when the oven is
installed.
4.
The power supply cord (the cord with plug) shall not contact the hot parts of the appliance.
5.
If the power supply cord (the cord with plug) is damaged, this cord shall be replaced by the manufacturer
or its service agent or an equally qualified personnel to prevent a hazardous situation.
6.
Never wash the product by spraying or pouring water on it! There is a risk of electrocution.
7.
WARNING
: To avoid electric shock, ensure that the device circuit is open before changing the lamp.
8.
WARNING
: Cut off all supply circuit connections before accessing the terminals.
9.
WARNING
: If the surface is cracked, turn off the appliance to avoid risk of electric shock.
10.
Do not use cut or damaged cords or extension cords other than the original cord.
11.
Make sure that there is no liquid or humidity in the outlet where the product plug is installed.
12.
The rear surface of the oven also heats up when the oven is operated. Electrical connections shall not
touch the rear surface, otherwise the connections may be damaged.
13.
Do not tighten the connecting cables to the oven door and do not run them over hot surfaces. If the cord
melts, this may cause the oven to short circuit and even a fire.
14.
Unplug the unit during installation, maintenance, cleaning and repair.
15.
If the power supply cable is damaged, it must be replaced by its manufacturer or authorized technical
service or any other personnel qualified at the same level, in order to avoid any dangerous situation.
16.
Make sure the plug is inserted firmly into wall socket to avoid sparks.
17.
Do not use steam cleaners for cleaning the appliance, otherwise electric shock may occur.
18.
An omnipolar switch capable to disconnect power supply is required for installation. Disconnection from
power supply shall be provided with a switch or an integrated fuse installed on fixed power supply
according to building code.
19.
Appliance is equipped with a type ‘’Y’’ cord cable.
20.
Fixed connections shall be connected to a power supply enabling omnipolar disconnection. For appliances
with over voltage category below III, disconnection device shall be connected to fixed power supply
according to wiring code.
Содержание OF910FXCOM
Страница 1: ...Instruction Manual Free Standing Oven OF910FX OF910FXCOM OF995FXCOM ...
Страница 26: ...1 IM v4 0 ...