Omega ODW715X, Инструкция по эксплуатации

Страница: 9 / 31

6
Installation Instructions
Step 2. Underneath existing work top
(When fitting beneath a work top)
In most modern fitted kitchens there is only one
single work top under which cabinets and
electrical appliances are fitted. In this case remove
the work top of the dishwasher by unscrewing the
screws under the rear edge of the top (
a ).
Attention
After removing the work top, the screws must be screwed again
under the rear edge of the top (
b ).
Selecting the best location for the dishwasher
The installation position of dishwasher should be near the existing inlet and drain hoses and power cord.
Illustrations of cabinet dimensions and installation position of the dishwasher.
1. Less than 5 mm between the top of dishwasher and cabinet and the outer door aligned to
cabinet.
Instructions
2. If dishwasher is installed at the corner of the cabinet, there should be
some space when the door is opened.
NOTE :
Depending on where your electrical outlet is, you may need to cut a hole in the
opposite cabinet side.
Electrical, drain
820mm
and water supply
line entrances
80
100