Omega ODW715X, Инструкция по эксплуатации

Страница: 18 / 31

15
Operating Instructions
Adjusting the rinse aid reservoir
To achieve a better drying performance with limited rinse aid, the dishwasher is designed to adjust the consumption
by user. Follow the below steps.
1.
Close the door, switch on the appliance.
2.
Within 60 seconds after the appliance was switched on press the Rapid button for more than 5 seconds to enter
the set model, the rinse aid indication blinks as 1Hz frequency.
3.
Press the Rapid button again to select the proper set according to your using habits, the setting will change in the
following sequence:
d3->d4->d5->d1->d2->d3.
The higher the number, the more rinse aid the dishwasher uses.
4.
Without operation in 5 seconds or press the Power button to complete the setup and exit the setting mode.
Filling The Detergent Dispenser
NOTE:
•
Be aware that depending on the soiling of water, setting may be different.
•
Please observe the manufacturer’s recommendations on the detergent packaging.
Slide to right
Press down
1. Please choose an open way according to the
actual situation.
•
Open the cap by sliding the release
catch.
•
Open the cap by pressing down the
release catch.
2. Add detergent into the larger cavity A for the main
wash cycle. For better cleaning result, especially if you
have very dirt items, pour a small amount of detergent
will activate during the pre-wash phase.
A
3. Add detergent into the larger cavity A for the main
wash cycle. For better cleaning result, especially if you
have very dirt items, pour a small amount of detergent
will activate during the pre-wash phase.