![background image](http://html1.mh-extra.com/html/omega/ocg62xa/ocg62xa_installation-operation-and-maintenance-instructions-manual_3980516008.webp)
—connect the blue wire to the terminal marked with the letter N or coloured black;
—connect the brown wire to the terminal marked with the letter L or coloured red.
After having installed the appliance, the power switch or power plug must always be in an accessible position.
Electrical connection diagram
N.B For connections to the mains power supply, never use adapters, reductions or multiple power points as
these may overheat and catch fire.
In the event that installation should require modifications to the mains supply wiring system or if the power plug
is not suitable for the type of power point available, it is required that a qualified technician be called to carry
out substitution.
The technician will also have to verify that the cross-section of the electric cables on the power point match the
appliance’s power rating.
INSTALLATION
Note: These tops are designed to be fitted into kitchen fixtures measuring 600 mm in depth.
In order to install the cooker top into the kitchen fixture, a hole with the dimensions shown on the cutting size
board has to be made, keeping in consideration the following:
Within the fixture, between the bottom side of the cooker top and the upper surface of any other appliance or
internal shelf there must be a clearance of at least 30 mm;
Keep at least 200mm from the periphery of the burners to any side or rear wall with combustible surfaces or
160mm from walls with non-combustible surfaces.
There must be a distance of at least 650 mm between the hob and any extractor hood positioned immediately
above it, or 800mm between the hob and any wall cupboard.
It is essential to install a heat baffle between the bottom of the hob and the underlying unit.
Note: Keep a safe distance away from combustible constructions.
8