Omega OBMF243FI, Инструкция по эксплуатации

Страница: 15 / 22

12
Maintenance and Cleaning
Disconnect the unit from the power supply before cleaning.
Do not wash your appliance by pouring water on it.
Do not use abrasive products, detergents or soaps for cleaning the appliance.
After washing, rinse with clean water and dry carefully. When you have finished cleaning, reconnect the plug to the
mains supply with dry hands.
•
Make sure that no water enters the lamp housing and other electrical components.
•
The appliance should be cleaned regularly using a solution of bicarbonate of soda and lukewarm water.
•
Clean the accessories separately by hand with soap and water. Do not wash accessories in a dish washer.
•
Clean the condenser with a brush at least twice a year. This will help you to save on energy costs and increase
productivity.
The power supply must be disconnected during cleaning.
Defrosting
•
Your appliance performs automatic defrosting. The water formed as a result of defrosting passes through the water
collection spout, flows into the water tray behind your appliance and evaporates there.
•
Make sure you have disconnected the plug of your appliance before cleaning the water tray.
•
Remove the water tray from its position by removing the screws (if it has screws). Clean it with soapy water at
specific time intervals. This will prevent odours from forming.
Replacing LED Lighting
To replace any of the LEDs, please contact the nearest Authorised Service Centre.
Note: The numbers and location of the LED strips may change according to the model.
Transportation and Changing Positioning
•
The original packaging and foam may be kept for re-transportation (optional).
•
Fasten your appliance with thick packaging, bands or strong cords and follow the instructions for transportation on
the packaging.
•
Remove all movable parts or fix them into the appliance against shocks using bands when re-positioning or
transporting.
Always carry your appliance in the upright position.
water tray