Omega MeGo PBL1000BD, Руководство пользователя

Страница: 11 / 44

RATED VOLTAGE 120V~
RATED POWER
1000W
RATED FREQUENCY
60HZ
CONTINUOUS OPERATING TIME
≤45 Seconds
To reset appliance, follow the resetting procedure below:
1. Unplug the appliance from the electrical outlet.
2. Remove and empty the cup and ensure that no food is jamming the cutting blades.
3. Allow the appliance to cool for approximately 30 minutes.
4. Re-install the cup onto the base and re-plug the appliance into the electrical outlet.
5. Proceed to use the appliance as before while making sure not to exceed the recommended maximum capacities.
PROBLEMS POSSIBLE REASONS & SOLUTIONS
MOTOR DOESN’T
START OR
ATTACHMENT
DOESN’T ROTATE.
FOR THE CUPS, MAKE SURE THAT THE TABS ARE SEATED IN THE SLOTS
AND TURNED CLOCKWISE.
FOOD IS UNEVENLY
CHOPPED
EITHER YOU ARE CHOPPING TOO MUCH FOOD AT ONCE, OR YOU ARE
NOT PULSING PROPERLY. REDUCE THE AMOUNT OF FOOD IN THE CUP.
FOOD IS TOO
FINELY CHOPPED
OR TOO WATERY.
THE FOOD HAS BEEN OVER PROCESSED. USE SHORT PULSES FOR
BEST RESULTS. PRESS DOWN ON THE CUP.
CUP IS LEAKING.
MAKE SURE THAT YOUR LID OR BLADE ASSEMBLY IS PROPERLY ASSEMBLED
TO THE CUP. LEAKING MAY OCCUR IF IT IS MISALIGNED WHEN TWISTED
ONTO THE CUP. TURN THE LID.
UNIT DOESN’T
TURN ON.
MAKE SURE THE UNIT IS PLUGGED IN.
ROTATE AND PRESS DOWN ON THE CUP TO TURN THE UNIT ON.
MAKE SURE THE BLADE ASSEMBLY IS PROPERLY ASSEMBLED TO THE
CUP AND THAT IT IS NOT MISALIGNED
UNIT DOESN’T
TURN OFF.
UNPLUG THE POWER CORD FROM THE ELECTRICAL OUTLET AND CALL
CUSTOMER SERVICE FOR SUPPORT.
DOESN’T MIX WELL.
PULSE INGREDIENTS FOR BEST RESULTS. PRESS DOWN ON THE CUP IN
SHORT INTERVALS FOR EVEN BLENDING AND CHOPPING. FOR FROZEN
INGREDIENTS, PULSE IN SHORT INTERVALS OF 2-5 SECONDS AND REPEAT.
LID/BLADE AS-
SEMBLY WILL NOT
PROPERLY ALIGN
TO THE CUP.
SET THE CUP ON A LEVEL SURFACE. PLACE THE LID OR BLADE ASSEMBLY ON
TOP OF THE CUP AND ALIGN THE THREADS SO THAT THE LID/BLADES SIT FLAT
ON THE CUP. TWIST CLOCKWISE SO THAT THE LID/BLADES EVENLY ALIGN TO
THE CUP UNTIL YOU HAVE A TIGHT SEAL.
The above mentioned contents are common fault analysis and troubleshooting,
for others, please contact our company Customer Service Department.
CONTACT US:
Customer Service: 1-800-633-3401
Online: www.OmegaJuicers.com/contact-omega-juicers
TROUBLE SHOOTING
9 10
SAFETY INDEX