Omega LVU2800 Series, Руководство пользователя

Страница: 8 / 23

8 of 23
WIRING (continued) Step Four
General notes for electrical connections, usage and safety:

Where personal safety or significant property damage can occur due to a spill, the installation must
have a redundant backup safety system installed.

Wiring should always be completed by a licensed electrician.

Supply voltage should never exceed 28 VDC.

The sensor materials must be chemically compatible with the liquids to be measured.

Design a fail ‐ safe system for possible sensor and/or power failure.

Never use the sensor in environments classified as Hazardous .
Voltage Output
LVU2800 Series can be used as a 0 to 5 or 0 to 10 VDC output device. A resistor will need to be added to the
circuit to enable a voltage output (refer to the wiring diagram below).

0 ‐ 5 VDC output
o
Add a 250 Ohm resistor
o
Actual output will be 0.8 to 5 VDC

0 ‐ 10 VDC output
o
Add a 500 Ohm resistor
o
Actual output will be 2 to 10 VDC