Omega HHM32, Руководство пользователя

Страница: 8 / 19

6
OPERATION
Before taking any measurements, read the Safety Information Section.
Always examine the instrument for damage, contamination (excessive dirt,
grease, etc.) and defects. Examine the test leads for cracked or frayed
insulation. If any abnormal conditions exist do not attempt to make any
measurements.
Auto-Power-Off function
Once turning on the meter, the auto-power-off function starts to count if the
function does not change within 30 minutes, the auto-power-off condition
will be activated. When power-off happens, the final data is saved. If push
anyone of the push function (except HOLD and AC/DC key) that will turn
on the power again, and LCD segment "APO" will be turn on.
The auto-power-off feature can be disabled manually as a power-on option
by press MAX/MIN button while turning the meter on, and LCD segment
"APO" will be turn off.
Re-Power-On
Once auto-power-off happens, push anyone of the push function (except
HOLD and AC/DC key) or change the rotary mode can re-power-on the
meter. When anyone of the push function is enabled, the storage value will
display with HOLD mold (except logic state), if auto-power-off happened
under MAX/MIN (or PEAK, REL) mode, the P
MAX
, P
MIN
or relative and
reference value will be kept. But if re-power-on the meter with rotary mode,
the storage value will be cleared.