8
A-H Button
In Auto hold mode, the meter will capture and hold the first stable non-
zero(>100 digits) reading after a zero reading(<100 digits). Several consecu-
tive measurements can be held and displayed without pressing the (A-H)
buttion. Simply by shorting the test leads together between measurements.
Press (A-H) to toggle in and out of the Auto Hold mode.
In the Auto Hold mode, the A-H annunciator is displayed.
REL
D
D
D
D
D
Button
Press (REL
D
) to enter the Relative mode, zero the display, and store the
displayed reading as a reference value. The relative mode annunciator(
D
) is
displayed.
Press (REL
D
) again to exit the relative mode.
D
D
D
D
D
SET Button
The Relative value can also be changed by the user.
To set the Relative value, press the (
D
SET) to enter the
D
SET mode, relative
value enter via yellow buttons (+/- 4300). Then press the (
D
SET) button, store
the reference value.
Press (REL
D
) to enter the Relative mode, then press (
D
SET) to enter Relative
set value as a referance value.
TIME Button
Press (TIME) to enter elapsed-time mode.
Push (TIME) to cycle through the Minutes and seconds, hours and minuates.
Press and hold down the (TIME) for 2 seconds to exit TIME mode.
