Omega HHM27, Руководство пользователя

Страница: 8 / 16

6
OPERATION
Before taking any measurements, read the Safety Information Section.
Always examine the instrument for damage, contamination (excessive dirt,
grease, etc.) and defects. Examine the test leads for cracked or frayed
insulation. If any abnormal conditions exist do not attempt to make any
measurements.
Auto Power-down mode
If unused for about 30 minutes, the tester will power-down automatically.
Press RESET button switches to resume power-on mode. If you should
disable Auto Power-down mode, press SELECT buttom when you turn on the
meter.
SELECT Function Button (DC/AC),(
W W
W W
W
/ )
The SELECT Function button is Yellow in color. Press it to toggle to the
alternate function (AC, Audible continuity , and Diode ) shown in Yellow on the
meter face.
Hz-% Function Button
Press HZ-% button toggle between frequency and duty cycle mode.
REL
D D
D D D
Button
Press (REL
D
) to enter the Relative mode, zero the display, and store the
displayed reading as a reference value. The relative mode annunciator(
D
) is
displayed.
Press (REL
D
) again to exit the relative mode.